|
|
BT-25 Series Strand Pelletizer |
BT25 With Stand
Option |
|
Based on the proven
design of our E Series Strand Pelletizers, the
Scheer Bay Co. has developed a true
lab sized pelletizer. This design is the first of its kind, which will perform as good as
its larger "Big Brother." From glass-filled engineered resins to soft rubber
like polymers, this unit is tough enough to get the job done. This robust and compact unit
has many of the features and benefits of larger units such as:
|
|
|
Standard BT25 |
Cutting Chamber Open
|
Air Knife Option |
|
|
|
|
|
Uni-Base Option With 6' Water Bath |
BT25 Cutter With Table
Top Water Bath |
Strand Hold Down
Bar |
| |
- Positive Strand Feed to the Cutter
- Optimum Strand Control Due to an Larger
Offset Upper Feedroll
- Tool-less Entry to the Cutting Chamber
- Easily Removable Rotor and Upper Feedroll
- Maintenance Free Bearings
- Complete Access for Visual Inspection for
Cleanliness
- Safety Interlocked
Specifications and Design subject to
change without notification. |
|
|
|
Click Here for Machine
Literature Spec Sheet.
|
|
BT-25 Series Strand Pelletizer Specifications |
| Working Width |
1 inch |
25 mm |
| Strand Rating (1) |
2-4 |
2-4 |
| Standard Strand
Velocity |
20-78 FPM |
6-24
m/min |
| Standard Rate per
Strand (2) |
25 Lb/hr |
11
Kg/hr |
| Optional Strand
Velocity |
40-155 FPM |
12-48
m/min |
| Optional Rate per
Strand (2) |
50 Lb/hr |
22
Kg/hr |
| Motor Size (Rotor) |
3/4 HP |
0.55
kW |
| Motor Size (Feedroll) |
1/17 HP |
0.04
kW |
| Maximum Rotor Speed |
850 RPM |
| Voltage |
110 Volt
Single Phase |
| Type of Drives |
DC |
| Amp Draw |
12.9 Amp |
| Standard Number of
cutting edges (Rotor) |
12 |
| Number of cutting
edges (Bed Knife) |
8 |
| Optional Number of
cutting edges (Rotor) |
6 |
|
(1) Up to four strands of
Olefins, Up to two strands of engineered resins.
(2) Based on a 1/8" Diameter Strand,
1/8" long pellets, and
Material with a Specific Gravity of 1.0 |
|
